From Passive Vibrations to Electricity–A Breakthrough in Power Generation
How would you like to have a device that generates electricity just from the vibrations that are all around us? How about if this device were smaller enough to be used in lots of small devices? Making things like wireless transmitters small, cheap, and self-powered? It’s a reality now:
The trick with this generator is efficiency: Its vibrating magnets are 10 times better at generating current than other machines of this sort. The obvious use for this is in wireless sensors, that currently use batteries that need to be replaced, and therefore must be located in accessible spots. With a vibration generator like this, you can stash a sensor wherever you like. Wherever you like.
The generator may also one day be used to power a pacemaker, which would indeed be a funny twist: It would derive its power from the beating of the heart that its job is to keep on track. How’s that for existentialism? Source: Free Energy Isn’t Free: Here’s One Magnetic Free Energy Machine That Actually Works – Gizmodo
Just to recap how this actually works, when you spin magnets around a copper coil you generate current. Basic stuff … it’s what powers all those wind up radios and flashlights. Through the same principle and physics these two vibrating magnets do the same thing. If you want to know more about the physics behind this Wikipedia’s article on electrical generators is very cool.
2 Comments
I was looking at the Joe Cell thing and trying to figure it out. I hypothesized that most of the stuff you hear about it now is just disinfo. I assumed that it was an electrolysis device as it appears rather than some esoteric etheric device which shoots secret energy into your carburetor and restructures the air so that it burns.
If one looks at a Joe Cell, one sees that it appears to work as if a number of electrolysis cells were connected in series. [Each ring in the Joe cell acts as both anode on one surface and cathode on the
other.] I decided to test gas production from electrolysis cells in series.
For the same amount of power, I produced approximately 300% more hydrogen when six electrolysis cells were connected in series than the single cell control. It works. Try it yourself with test tubes and straight DC power. I was using 16 V DC.
The single cell ran at 16V 70milliamps for 10 minutes and filled 3.4 cm of the test tube with hydrogen.
6 electrolysis cells were set in series and ran at 16V, 10milliamps for 60 minutes and each test tube was filled with 2.4cm of hydrogen.
The results conservatively showed 300-400% higher H2 production than standard DC electrolysis. Check it out, do the experiment. Took me just a few minutes to set up.
Peace,
Joshua Gulick
P.S. check out my new website http://alchemicals.com and let me know what you think or get a free ebook about alchemy. Or order my magnetite pills which might make you psychic! Add a link to me on your website and tell me about it and I’ll give you a big discount!
This little thing is really nifty… I like the idea of a vibration generator would be initially used as vibration detector